Accessories

Shopping Cart

DIGITAL BREATH ALCOHOL TESTER

CHARACTERICTICS:
1 Sensor: Semiconductor alcohol sensor
2 Warm-up time: Within 10 seconds
3 Respond time: Within 5 seconds
4 Operating temperature range:
5 Detection range: 0.00% – 0.19% BAC
0.0 – 1.9 g/l
6 Digital display results (%BAC,g/l)
7 Quick response and resume
8 Auto power-off
9 Low voltage indicator
10 Temperature indicator °C or °F
11 Time clock with 12/24 format
12 Alarm with Countdown & count-up timer
13 Batteries:
Tester: 3V (2 x AAA alkaline battery required)
Clock: 1.5V (AG13 Button Cell, included)
14 Size: 100 x 37 x 17 mm
How to use the alcohol tester
Warm Up
1. Press the power button once, the alcohol tester LCD will turn on with one beep sound.
2. The “warm up” symbol is displayed, and the 15 to 0 countdown is started that indicate the tester is in warm-up mode.
Note
• If first warm up is defeated, the tester will be reset automatically and warm up again for 1 – 3 times.
• It always has a large number of gas & impurity adsorbed on the surface of alcohol sensor, when first time taking out the tester from the packaging, or after long time no using for the tester, it need more time for cleaning and warm up the sensor, you should repress the power button and retry several times if possible
Test
1. The “Blow” symbol is displayed when warm-up is succeed, and the 10 to 0 countdown is started that indicate the tester is in testing mode.
2. Near and blow into the breath inhaler for 3-5 seconds.
3. Read the test result from the alcohol tester LCD.
4. The “Caution” symbol is displayed if the alcohol concentration is the level:
• 0.02% BAC (0.2g/l) to 0.05% BAC (0.5g/l)
• 0.05% BAC (0.5g/l) to 0.08% BAC (0.8g/l)
5. The “Danger” symbol is displayed with beep audible alert if the alcohol concentration is the level:
• over & equal 0.05% BAC (0.5g/l)
• over & equal 0.08% BAC (0.8g/l)

Price: 38.00 BGL
The price excluding VAT

Updating...

TUBELESS TIRE REPAIR STRINGS

Remove item that caused puncture (note direction of injury). Inflate tire to 35 pounds.

Push repair seal into the hole until only ½ inch of the repair seal remains outside the tire. Turn inserting tool ¼ turn and slowly pull out.

Dip probe-rasp into tire repair lube. Push probe-rasp into injury and work up and down, carefully following direction of injury.

Cut excess repair seal as close to the tire as possible.

Center repair seal in slot of inserting tool. Do not apply cement to repair seal. Repair seal is self adhesive.

CAUTION: No outside repair seal can be safely applied when extent of the injury is unknown. If puncturing object is not found, dismount tire to determine full extent of injury.

Price: 23.40 BGL
The price excluding VAT

Updating...

Digital Air Compressor

A necessary addition to the TPMS systems is the Preset Auto-Stop Digital Air Compressor
Plugged into the power input of your vehicle The Air Compressor will help you in a difficult situation on the road. You can in a short time inflate a flat tire.
Apart from this a set of needles and adapters let you use it to inflate air-mattresses, balls, bicycle tires and beach attributes.
Please carefully read the recommendations and instructions before carrying our installation, operating, adjusting or maintenance, since they give important information regarding the Safety of Use. You can download the User’s Manual here.

Price: 54.20 BGL
The price excluding VAT

Updating...

DIGITAL TIRE PRESSURE GAUGE

10-50PSI or 0.5-3.5Bar
Permanent LithiumPower
Increases Fuel Efficiency
Reduces Tire Wear

Specifications:

• Large LCD display;
• Auto on/off switch;
• Pressure Range 0,50 to 3,50 Atm.
• Resolution – +/- 0,05 Atm.
• Operating temperature -10°С to +60°С;
• Permanent lithium battery;
• Dimensions 67х28х23 mm

TIRE PRESSURE ALERT VALVE CAPS

These easy to install replacement valve caps constantly monitor your tire pressures with clear, bright color indicators. TIRE ZONED valve caps are precisely made for a full range of cars, vans, motorcycles and light trucks and are accurate to within 1 lb.
Utilize the TIRE ZONED safety pressure indicators and travel with confidence.
Be sure to choose the TIRE ZONED to match the front and rear pressure as recommended by the vehicle manufacturer.

FEATURES
• Easy to install
• Increased safety
• Increased gas mileage
• Increased tire life

PRODUCT DESCRIPTION

TYRE ZONED – tyre air pressure indicator(valve cap) allow for visual air pressure loss from your tyres by three tier colour indicators GREEN, YELLOW, RED, visible through upper transparent portion of TYRE ZONED – tyre air pressure
indicator

INDICATOR DISPLAY FUNCTION
GREEN:CORRECT TYRE PRESSURE.
GREEN/YELLOW:AIR LOSS 25% PSI, INFLATE TYRE TO RECOMMEND AIR PRESSURE.
GREEN/YELLOW/RED:
AIR LOSS MORE THAN 25%~30% PSI, INFLATE TYRE IMMEDIATELY, DO NOT OPERATE VEHICLE UNTIL PROBLEM TYRE IS INFLATED TO RECOMMENDED AIR PRESSURE

NOTE: When the air loss 25% psi, the indicator may display GREEN/YELLOW/RED, you shall inflate tire immediately .

FITTING INSTRUCTIONS:

Prior to fitting TYRE ZONED – tire air pressure indicator to your tire air valve, ensure you have selected the appropriate PSI-Bar rating for your application.

Remove existing tire air valve cap turning (anti clockwise).
Use our tire gauge to measure tire pressure; make sure the tire under correct pressure.

Once removed wash tire air valve thread with clean cloth soaked in mild detergent to move road grime thus creating positive connection once TYRE-ZONED – tire pressure indicator is applied to tire air valve.

If the indicator set with anti-theft kit, use the simple spanner to screw the nut to the tire air valve.

Fit the air indicator to tire air valve (turning clockwise) until fully threaded on tire air valve reason-able finger tight pressure is sufficient to secure the air indicator to your tire valve.

If the indicator set with anti-theft kit, use the simple spanner to screw the nut to the indicator (anti-clockwise).

Once the above procedure has been completed with the air indicator secured on to tire air valve, the clear portion of the air indicator should automatically exhibit GREEN through clear section of the indicator – indicating your tire is inflated to recommend air pressure.

IMPORTANT

If your vehicle is subject to regular Auto Car Wash, after exiting Auto Car Wash, it’s recommended to check the indicator (on each tire air valve) for possible loosening which may occur during Auto Car Wash.